Chestnut Farms Soap Cutter Kit



At last, a modestly priced soap cutter you assemble.  Machine work done on all wood pieces.  Pre-drilled holes allow you to select the wire height you want.

Kit includes all wood, hardware including spare cutting wire, and sandpaper. 
You will also need: white glue such as Elmers or Titebond, Phillips screwdriver, needle nosed or duck bill pliers, wire cutter.

Built on a 8 1/2 x 11  inch plywood base.
Space between fences: 5 inches.

Options for cutting wire height above base: 1/2, 1, 1 1/2, 2, 2 1/2, 3,  3 1/2 inches plus 1 1/4 and 2 1/4 inches!  You wire the cutter for the height you want.

Shipping price calculated is to U.S.   Contact us for shipping cost to other countries.



Chestnut Farms Soap Cutter Kit      Price: $45.00

Chestnut Farms Soap Cutter Kit

The Soap Cutter you assemble.  Wire it for the cutting height you want!

1. Sand wooden pieces with supplied sandpaper; edges, corners, and flat surfaces
2. Attach the underside cleat with glue and supplied screws
3. Attach hardware; screw eyes and Ping tuning machine

4. Attach fences with glue and supplied screws
5. After the glue dries, wire the cutter to your selected cutting height.

Click on the picture below to see an enlarged view.  Use the Back button to return to this page.

Attach cleat with screws and glue Attach hardware Add fences, screw and glue Wire for your wire height Ready to cut soap!


Site Meter



All contents of this website are protected by copyright laws
and are the sole property of Winkel Chestnut Farm
1995-2012 inclusive